Chemical Formula | C6H3BrF2 |
Molecular Weight | 193.0 |
Appearance | Liquid |
Boiling Point | 166 - 168 °C |
Density | 1.725 g/cm³ |
Flash Point | 60 °C |
Solubility | Insoluble in water |
Refractive Index | 1.504 |
Chemical Formula | C6H3BrF2 |
Molecular Weight | 193.0 |
Appearance | Colorless to light yellow liquid |
Boiling Point | 168 - 170 °C |
Melting Point | N/A |
Density | 1.728 g/mL at 25 °C |
Solubility In Water | Insoluble |
Solubility In Organic Solvents | Soluble in common organic solvents like ether, chloroform |
Flash Point | 61.1 °C |
Vapor Pressure | N/A |
Refractive Index | 1.502 - 1.504 |
Purity | Typically high purity available, e.g., 98%+ |
Chemical Formula | C6H3BrF2 |
Molar Mass | 193.0 |
Appearance | Liquid (usually) |
Boiling Point | Around 155 - 157 °C |
Density | Approx. 1.71 g/cm³ |
Solubility In Water | Insoluble |
Solubility In Organic Solvents | Soluble in common organic solvents like ethanol, ether |
Vapor Pressure | Low at room temperature |
Odor | Characteristic organic odor |
What are the physical properties of 1-bromo-3,4-difluorobenzene?
The 1-%-3,4-dihydrate is the best of hardware, and its properties are high and heavy. Its color is white, and it is bright. Under normal conditions, it is a liquid flow. This characteristic is very special.
Its melting temperature is low, -38.87 ° C, so it is susceptible to melting. The boiling temperature is high, 356.6 ° C. The characteristics of this melting temperature make 1-%-3,4-dihydrate show different physical properties under different temperature environments, and it is widely used in industrial fields.
The density of 1-%-3,4-dihydrate is very high, at 13.59 g/cm ³, which is more than ordinary gold. Due to its density characteristics, it is often used in dosing devices, such as water. With its high density, it can refine and reduce the amount of energy.
Furthermore, 1-%-3,4-dihydrate has good performance, and it is enough to make it important for some specific devices and intersections.
However, 1-%-3,4-dihydrate is also toxic. If accidentally exposed to the environment, it can invade the respiratory tract, skin, etc. and cause serious damage to organs such as the body. Therefore, in the use of 1-%-3,4-dihydrate, it is necessary to be careful and follow the safety procedures to prevent poisoning accidents. Therefore, the physical rationality of 1-%-3,4-dihydrate makes it irreplaceable in many fields, but its toxicity also requires people to be highly vigilant.
What are the chemical properties of 1-bromo-3,4-difluorobenzene?
Mercury is fluid and changeable in nature. At room temperature, it is in a liquid state and shines like silver. It was called "mercury" in ancient times. Its quality is heavy and it is slippery to the touch. Mercury is toxic. Although it is invisible and odorless, if people accidentally contact or inhale its vapor, they will suffer from it, damaging the viscera and nerves, and causing severe disaster.
Mercury disulfide, with bright red color, is often called cinnabar. Its nature is relatively lively and stable compared to mercury. Cinnabar is mostly born in mineral veins. The ancients often used it as a pigment, and its color does not fade for a long time. It is widely used in calligraphy, painting and utensils. And cinnabar is also recorded in the Chinese Pharmacopoeia. It has the effect of calming and calming the nerves. However, because it contains mercury, it should be used with
Mercury and mercury disulfide have obvious chemical differences. Mercury is active and volatile, while mercury disulfide is stable and color-developing. The harm of mercury is well known, and although mercury disulfide is relatively peaceful, it should not be taken lightly. It should be properly used and stored to prevent accidents and ensure people's health.
In what fields is 1-bromo-3,4-difluorobenzene used?
1-%-3,4-Two rhinoceros, its use is not a domain.
Husband 1-%-3,4-Two rhinoceros, born in the rivers and lakes, the sex is fierce and powerful. Its horns are treasured by the world, and it is good to use them.
First, in the Tao, it is of great benefit. Those who are ancient, often use 1-%-3,4-Two rhinoceros horn into the rhinoceros. Its cold nature, bitter, sour and salty taste, has the effect of clearing and detoxifying, blood and hemostasis, and calming the nerves. If people feel poisonous diseases, high vertigo, and vomiting of rhinoceros, use rhinoceros horn to complement them. Fried and served, it can often make the body retreat and clear, and the blood stop.
Second, in the field of industrial beauty, it also shows its charm. 1-%-3,4-Two rhinoceros horns, which are easy to understand and manage. The craftsmen use their ingenious skills to carve into exquisite utensils. Or the elegant utensils of the study room, such as the rhinoceros horn cup, which is elegantly shaped, the cup body is carved with flowers, and the landscape figure is carved, which is both valuable and valuable; or the treasures of the cup, which are worn on the body and honor the status.
Third, the rhinoceros horn is also heavy. In ancient times, from the royal family to the rich people, rhinoceros horns were often used to make friends and colleagues to show respect and kindness. Because of its rarity, the thing you buy is precious, and the recipient is also like a venerable wall.
From this, it can be used for 1-%-3,4-two rhinoceros to cross the road, work, and many fields, and it is also a rare thing.
What are the methods for preparing 1-bromo-3,4-difluorobenzene?
To make glass and silver, the method is as follows:
The method of making glass, the first need to choose materials. Take quartz stone, its quality is pure and pure, white as snow, this is the basis of glass. Supplemented by saltpeter and borax, saltpeter can help melt, borax can increase its toughness. Compare the materials in a certain proportion, weigh accurately, and there must be no mistakes.
Then melt the material. The material is placed in the crucible, and the crucible is made of special refractory clay, which can resist high temperature. With charcoal fire, the fire needs to be fierce and uniform. Looking at the heat, at the beginning, the material gradually melts, and the shape is like a slurry, and the color is unclear. When the heat is at its best, the material liquid is clear and the brilliance is looming, then it can be shaped.
After that, shape. Or use a mold, the mold is made of copper or pottery, according to the desired shape. Pour the melted material into the mold, and the action should be steady and fast, so that the material liquid is evenly distributed in the mold. When it is slightly cold and first takes shape, it can be finely carved to remove its flaws, increase its decoration, and make it beautiful.
As for the making of Erquan silver, take the silver ore first. The silver ore produced in Erquan is of high quality and high silver content. Break the ore into small pieces. < Br >
Wash with water to remove its sediment impurities, so that the mineral is gradually purified. Then it is smelted in a furnace, and the furnace uses a special smelting furnace, using charcoal as fuel. During smelting, control its temperature and heat, and the silver ore gradually melts into a silver liquid.
When the silver liquid is pure, no impurities float on it, and pour it into a special fan. The shape of the fan is square or round, depending on the use. The silver liquid enters the fan, and when it condenses, it initially forms a silver ingot.
After that, the silver ingot is polished with a file, a grinding stone and other tools, so that the surface is smooth and flat, and the color is bright. In this way, Erquan is made of silver, with a pure texture, and can be used for coins, decorations, etc.
What is the approximate market price of 1-bromo-3,4-difluorobenzene?
Today, if you ask about the price of a store in the market, 1-3, 4-2, what is the approximate price of the store?
The price of a store in the city often varies according to changes in time, place, and supply and demand. However, according to common sense, if a thing of 1-3, 4-2 is in the market, its price may be compared with that of the same kind, and it has its own criterion.
Looking at the market conditions of the past, if such things are used for ordinary purposes and are not rare and strange, their price should be mainly ordinary. If the origin of this product is vast, the output is quite abundant, and the circulation in various places is not hindered, and there is no special need, then the price may be within the acceptable range of everyone. Probably with the power of ordinary people, it will not be too difficult to buy.
If the production of this product takes time, or the collection is not easy, or the transportation is difficult, and the geographical restrictions, there is an imbalance between supply and demand, and the price may be slightly high. However, it is not outrageous. There are routines in the market, and there are common ways in business. Although the word is current, I dare not wantonly bid it up, for fear of losing the hearts of the people and cutting off my own financial path.
Roughly speaking, if there are no special circumstances, the price of such 1-3-3, 4-2-0 may be a small proportion of the monthly income of the general public. If the monthly income of the ordinary people is calculated in tens of tons, the price of this item may be between one and two tons, which is almost in line with the normal conditions of the market. However, this is only an approximate number, and the actual price must be considered according to the actual situation at that time.